Offroad40415 Products
$ 396.95
Product Name: TOOL TRAYProduct Type: Standard 1000 Electric LiftBrand: HANDYMFG Part
Number: 16010Features:
Requires 110 volt power source
1000 lb capacity
80" long, 24" wide
Height adjustable from 7" to 30"
Includes 30" ramp
Weighs 311 lbs
$ 720.95
Product Name: TIMING BELT TENSIONER TOOL DUCATIProduct Type: Timing Belt Tensioner ToolBrand: TEXAMFG Part
Number: D088A0Features:
Verifies the correct engine timing belt tensioning. Engineered according to Ducati specifications and specifically built for Ducati bikes.
$ 35.95
Product Name: CARTRIDGE LOCK TOOLProduct Type: Cartridge Locking ToolBrand: DRCMFG Part
Number: ED59-37-290
$ 9.95
Product Name: POWER VALVE ADJUSTING TOOL BETAProduct Type: Power Valve Adjusting ToolBrand: ENDURO ENGINEERINGMFG Part
Number: 22-4013Features:
Fine Tune your powervalve with our Billet powervalve adjustment tool.
Perfect size for the tool box or Tool pack
Adjust your powervalve with one simple tool.
$ 21.95
Product Name: DELUXE TOOL POUCH BLACKProduct Type: Deluxe Tool PouchBrand: SP1MFG Part
Number: SM-16083Features:
Made from heavy duty CorduraTM nylon
6 pockets for pliers, screw drivers, etc.
Zippered compartment for smaller sockets, bolts, spark plugs, etc.
Velcro® closure keeps pouch rolled up
$ 24.95
Product Name: MIKUNI CARBURETOR TOOL KITProduct Type: Mikuni Carburetor Tool KitBrand: SP1MFG Part
Number: 15-866Description:
Handy kit includes all tools necessary to completely disassemble carb, change jets, etc.
$ 33.95
Product Name: ECONOMY TOOL KIT BLACKProduct Type: Economy Tool KitBrand: FIRE POWERMFG Part
Number: 76000Features:
5’’ slipjoint pliers
3 open end wrenches (8x10mm, 10x12mm, 14x17mm)
Spark plug wrench (21x24mm)
Screw driver set (#2 and #3 Phillips, Flat Driver)
Carrying pouch
$ 24.95
Product Name: JET CLEANING TOOLProduct Type: Jet Cleaning ToolBrand: HELIXMFG Part
Number: 388-0611Features:
Priceless item to clean carb jets and small holes
Compact enough to keep in your toolbox
Ten pin sizes to clean most common jet sizes
$ 79.95
Product Name: MECHANIC BAR STOOLProduct Type: Mechanic Bar StoolBrand: FLY RACINGMFG Part
Number: 369-9998Features:
Heavy duty chrome tool tray
Ball bearing seat swivel
4 Ball bearing casters
Oil-resistant vinyl seat
Chrome Plated legs
$ 59.95
Product Name: BAR STOOL BLACKProduct Type: Bar StoolBrand: FLY RACINGMFG Part
Number: 369-9999Features:
Chrome Plated legs
Oil-resistant vinyl seat
Ball bearing seat swivel
Non-slip rubber feet
30” overall height
$ 19.95
Product Name: TIREPRO DIAL TIRE GAUGEProduct Type: Tirepro GaugeBrand: CRUZ TOOLSMFG Part Number: DTPG1Description: Accurate and easy to read, this analog gauge has a 12” long flexible hose for easy access making it perfect for motorcycles, ATV or UTV. Rotating brass head makes it easy to reach tight places and the needle holds...
$ 19.95
Product Name: TIREPRO DIGITAL TIRE GAUGEProduct Type: Tirepro Digital Tire GaugeBrand: CRUZ TOOLSMFG Part Number: DGTG2Description: The TirePro Digital Tire Gauge is ideal for motorcycle, UTV and ATV use, with a large display and accuracy from 1-99psi. Readings are shown to 0.1 psi levels, with bar, Kpa, and Kg-cm2 scales also provided. Ergonomic...
$ 29.95
Product Name: SOCKET BIT SET 10PC TORXProduct Type: Socket Bit SetBrand: CRUZ TOOLSMFG Part Number: TX38TBSDescription: Professional strength socket bits made from heat-treated S2 alloy. The 3/8” drive works well with ratchet, T-handle, or cordless driver in the shop. Bit size is laser imprinted for easy identification. The 8-piece Metric Hex,10-piece Inch Hex,...
$ 24.95
Product Name: SOCKET BIT SET 10PC HEX STANDARDProduct Type: Socket Bit SetBrand: CRUZ TOOLSMFG Part Number: IN38HBSDescription: Professional strength socket bits made from heat-treated S2 alloy. The 3/8” drive works well with ratchet, T-handle, or cordless driver in the shop. Bit size is laser imprinted for easy identification. The 8-piece Metric Hex,10-piece Inch...
$ 24.95
Product Name: SOCKET BIT SET 8PC HEX METRICProduct Type: Socket Bit SetBrand: CRUZ TOOLSMFG Part Number: ME38HBSDescription: Professional strength socket bits made from heat-treated S2 alloy. The 3/8” drive works well with ratchet, T-handle, or cordless driver in the shop. Bit size is laser imprinted for easy identification. The 8-piece Metric Hex,10-piece Inch...
$ 17.95
Product Name: DRIVE SLIDING T-DRIVER 1/4"Product Type: 1/4" Sliding "T" DriverBrand: CRUZ TOOLSMFG Part Number: MTD14Description: This 7” sliding handle T-driver has a ¼” tip to drive sockets or socket bits for fast and easy work in the shop or while traveling. The T-driver handle slides to either side for increased leverage or...
$ 14.95
Product Name: MAXHOOK SPRING HOOKProduct Type: Spring PullerBrand: CRUZ TOOLSMFG Part Number: SH2Description: Designed to push, pull, or twist the spring onto or off the bike, the MaxHook’s tip is precision cut from heat treated carbon steel and features a high-grip PVC coated handle. Lifetime Guarantee - no questions asked!Features: Designed to...
$ 14.95
Product Name: SPANNER WRENCHProduct Type: Spanner WrenchBrand: CRUZ TOOLSMFG Part Number: SPAN1Description: The perfect tool for adjusting pre-load on a shock, this spanner is made of tough stainless steel and is compact enough to bring in your tool kit.Features: Perfect tool for adjusting pre-load on a shock. made of tough stainless steel...
$ 24.95
Product Name: ROLL-UP POUCHProduct Type: Roll-Up PouchBrand: CRUZ TOOLSMFG Part Number: TPOUCH1Description: A rugged pouch crafted from ballistic nylon with 18 pockets to accommodate a wide range of tools. The 9.5” x 16” organizer rolls tools up tight allowing riders too easily stow and go for motorcycle and other powersports adventures.Features: A...
$ 45.95
Product Name: SAW GUIDEProduct Type: Saw GuideBrand: PARK TOOLMFG Part Number: SG-6Features: Ensures a straight, clean cut on handlebars and tubing from 1" to 11/4" Simply clamp onto the tube and cut, letting the Saw Guide guide the hacksaw blade Built with a non-scratching body and heat-treated steel cutting plates to withstand...
$ 35.95
Product Name: ALUMINUM VISE INSERTProduct Type: Aluminum Vise InsertBrand: PARK TOOLMFG Part
Number: AV-5Features:
Safe way to hold suspension shafts
Made from precision extruded aluminum
Include top retainer legs and magnets that are easy to use in a bench vise
$ 211.95
Product Name: STEERING RACE PRESSProduct Type: Steering Race PressBrand: PARK TOOLMFG Part Number: HHP-2MFeatures: HHP-2M easily and accurately presses steering head tube races, eliminating damaged or misaligned bearing races and helps prevent dented and chipped frames Unique design permits quick tool installation and release after races are seated Heat-treated bushing (included) provide...
$ 36.95
Product Name: STEERING RACE REMOVER 25-31MMProduct Type: Steering Race RemoverBrand: PARK TOOLMFG Part Number: RT-1Features: Makes head tube bearing race removal easy Tool is pulled through the steering tube until the flared ends snap in behind the race. A blow on the tool head removes the race Tool fits most brands with...
$ 89.95
Product Name: STEERING TUBE BEARING INSTALLERProduct Type: Steering Tube Bearing InstallerBrand: PARK TOOLMFG Part Number: CRS-2MFeatures: New safe approach to lower bearing installation Unique system utilizes specially designed aluminum inserts to quickly and accurately install nearly any lower bearing Includes three specifically shaped aluminum inserts (1",1 1/8",1 3/8") and a heat treated,...
$ 63.95
Product Name: AXLE ADAPTORProduct Type: Axle AdaptorBrand: PARK TOOLMFG Part
Number: TS-TA
$ 84.99
Product Name: CHAIN RIVET TOOLProduct Type: Chain Rivet ToolBrand: MOTION PROMFG Part Number: 08-0467Features: Complete chain tool for most 520, 525, and 530 standard and O-ring chains Break, press, and rivet your chain with one compact tool Will rivet hollow nose master links (will not rivet solid soft-nose pins) Will push pin...
$ 36.99
Product Name: SIDE JAW PINCER TOOLProduct Type: Side Jaw Pincer ToolBrand: MOTION PROMFG Part
Number: 12-0073Features:
Ideally suited for clamping vinyl or nitrile fuel lines to fittings
$ 92.95
Product Name: CHAIN BREAKER MODEL AProduct Type: Chain-A-Part Chain BreakerBrand: SMITHTOOLMFG Part Number: A8050Features: Long, hardened-steel punch forces pin all the way out So precise it never harms adjacent links The secret is Smith Tool's patented clamping cylinder for perfect alignment Best buy in roller chain tools in America Packed in a...
$ 15.95
Product Name: CHAIN BREAKER MODEL A REPLACEMENT PUNCHProduct Type: Chain-A-Part Chain Breaker PunchBrand: SMITHTOOLMFG Part
Number: A8053
$ 87.95
Product Name: CHAIN BREAKER MODEL BProduct Type: Chain-A-Part Chain BreakerBrand: SMITHTOOLMFG Part Number: B5035Features: Long, hardened-steel punch forces pin all the way out So precise it never harms adjacent links The secret is Smith Tool's patented clamping cylinder for perfect alignment Best buy in roller chain tools in America Packed in a...
$ 17.95
Product Name: CHAIN BREAKER MODEL B REPLACEMENT PUNCHProduct Type: Chain-A-Part Chain Breaker PunchBrand: SMITHTOOLMFG Part
Number: B5038
$ 32.99
Product Name: CLUTCH TOOLProduct Type: Clutch Holding ToolBrand: MOTION PROMFG Part
Number: 08-0008Features:
Designed to hold clutch baskets, flywheels, gears, sprockets, etc.
Jaws open to 5 inches wide
Made of medium carbon steel with hardened jaws
A very useful tool for holding any kind of mechanical work
$ 8.99
Product Name: JUMBO CHAIN TOOL REPLACEMENT PINProduct Type: Jumbo Chain Tool PinBrand: MOTION PROMFG Part
Number: 08-0D35
$ 109.99
Product Name: CHAIN RIVETING TOOLProduct Type: Chain Riveting ToolBrand: MOTION PROMFG Part
Number: 08-0058Features:
This new tool is designed to rivet chain links to form endless chain
Tool may also be used to break chain by pushing pin out
Each tool includes 3 sizes of pins
$ 2.99
Product Name: LARGE ANVIL FOR 57-8058 CHAIN RIVET TOOLProduct Type: Chain Riveting Tool Large AnvilBrand: MOTION PROMFG Part
Number: C08-058D
$ 6.50
Product Name: CHAIN RIVETING TOOL REPLACEMENT 2MM TIPProduct Type: Chain Riveting Tool TipBrand: MOTION PROMFG Part
Number: 08-0059
$ 6.50
Product Name: CHAIN RIVETING TOOL REPLACEMENT 3MM TIPProduct Type: Chain Riveting Tool TipBrand: MOTION PROMFG Part
Number: 08-0060
$ 6.50
Product Name: CHAIN RIVETING TOOL REPLACEMENT 4MM TIPProduct Type: Chain Riveting Tool TipBrand: MOTION PROMFG Part
Number: 08-0061
$ 6.50
Product Name: CHAIN RIVETING TOOL REPLACEMENT WEDGE TIPProduct Type: Chain Riveting Tool TipBrand: MOTION PROMFG Part
Number: 08-0062
$ 131.99
Product Name: JUMBO CHAIN TOOLProduct Type: Jumbo Chain ToolBrand: MOTION PROMFG Part Number: 08-0135Features: Designed to break roller chain up to #630 (Fits all standard and O-ring chain sizes #520 to #630) Designed to rivet chain up to #530 (not #630) Master link side plate press kit included to press on side...
$ 22.50
Product Name: OPTIONAL QUAD STAKE RIVET TOOL KITProduct Type: Quad Stake Rivet Tool KitBrand: MOTION PROMFG Part
Number: 08-0142Features:
The perfect compliment to the Jumbo Chain Tool
Retain that factory quad-stake look
Safely and properly peens soft-nose-type master link pin tip
$ 5.99
Product Name: GEAR SET FOR CARB TOOLProduct Type: 90° 1/4" Hex Driver Gear SetBrand: MOTION PROMFG Part
Number: 08-0246
$ 84.99
Product Name: LIGHTWEIGHT CHAIN BREAKER AND CHAIN PRESS TOOLProduct Type: T-6 Chain ToolBrand: MOTION PROMFG Part Number: 08-0358Features: Breaks 520 to 530 chain Use for pressing on and off 520 and some 525 master link side plates Will push link pin completely through link/side plate Body forged from high-strength 4130 chrome-moly Body...
$ 8.50
Product Name: T-6 CHAIN TOOL EXTRACTOR BOLTProduct Type: T-6 Chain Tool Extractor BoltBrand: MOTION PROMFG Part
Number: C08-358B
$ 9.50
Product Name: T6 CHAIN TOOL BODY BOLTProduct Type: T6 Chain Tool Body BoltBrand: MOTION PROMFG Part
Number: C08-358C
$ 34.99
Product Name: FORK ALIGN TOOLProduct Type: Fork Align ToolBrand: MOTION PROMFG Part Number: 08-0412Features: Quick and easy to use tool for aligning front forks to ensure they are parallel from top to bottom Proper alignment reduces sticking, enhancing fork performance Knurled adjustment screws for easy setup Reduces seal and bushing wear Will...
$ 33.99
Product Name: BRAKE CALIPER PISTON TOOLProduct Type: Brake Caliper Piston ToolBrand: MOTION PROMFG Part Number: 08-0591Features: Ultra low profile design removes pistons from monoblock disc brake calipers Fits pistons with a center bore of 15mm to 28mm Easy to use single locking screw Works on aluminum, steel, and titanium pistons Non-marring design...
$ 79.95
Product Name: SEDONA MECHANICS BAR STOOLProduct Type: Mechanic StoolBrand: SEDONAMFG Part
Number: 570-9998Features:
Heavy duty chrome tool tray
Ball bearing seat swivel
4 ball bearing casters
Oil-resistant vinyl seat
Chrome plated legs
$ 6.95
Product Name: HEAVY DUTY AIR TOOL LUBRICANT 16OZProduct Type: Air Tool OilBrand: LUCASMFG Part
Number: 10216Features:
Extends air tool life
Protects under extreme operating temperatures
Disperses water
Resists blow out
Excellent for locks
$ 22.95
Product Name: IGNITION POINT TOOLProduct Type: Ignition Point ToolBrand: DSSMFG Part
Number: TOOL-AFeatures:
Locks iignition points to advance position during tune-ups and work on distributor systems
Precision machined from the finest quality materials
For professional and serious home service use
Packaged individually on skin pack display card
