Tools & Supplies505 Products
$ 78.95
Product Name: COMPRESSION TOOLProduct Type: Compression ToolBrand: VENOM PRODUCTSMFG Part
Number: 930001Features:
Easy to use
Corrosion resistant
Aircraft quality steel
Compact, durable, impact resistant
$ 7.95
Product Name: BELT REMOVAL TOOL TIEDProduct Type: Belt Removal ToolBrand: VENOM PRODUCTSMFG Part
Number: 650343
$ 4.95
Product Name: BELT REMOVAL TOOL T27 TORXProduct Type: Belt Removal ToolBrand: VENOM PRODUCTSMFG Part
Number: 650192
$ 89.95
Product Name: CLUTCH ALIGNMENT TOOLProduct Type: Clutch Alignment ToolBrand: STRAIGHTLINEMFG Part
Number: 151-102Features:
The only alignment bar capable of aligning all offsets on all snowmobiles and ATV’s
Easy to use, no tool required
Can align engine alignment on most machines using the removable center adaptor
$ 89.95
Product Name: SD CLUTCH TOOL 08-13 QRS S/MProduct Type: QRS Secondary Clutch Spring CompressorBrand: STRAIGHTLINEMFG Part Number: 151-107Features: Simple and effective tool for removing helix and spring Compresses QRS clutch without removing entire jackshaft Works with both inner thread or outer thread clutches Safe rubber style expandable bushing for inner thread clutches...
$ 23.98
Product Name: INDEXING TOOL FOR SQUARE SUPPORT PLATESProduct Type: Indexing ToolBrand: WOODYSMFG Part
Number: SPI-TOOL-5Description:
For Square Support PlatesFeatures:
Aligns support plates with track edges to increase longevity of the stud and support plate
Parallel edges are essential to proper stud performance
Fits 3/8" ratchet drive
$ 64.98
Product Name: TRACK TENSION TOOLProduct Type: Track Tension ToolBrand: WOODYSMFG Part
Number: TRAK-TOOLFeatures:
Optimize performance and prolong the life of your track with regular use of this handy tool
Set the weight and measure the tension of your track
Follow recommendation in your snowmobile owner's manual
$ 14.98
Product Name: TRACK DRILL TOOLProduct Type: Universal Track DrillBrand: WOODYSMFG Part
Number: DRIL-UNIVFeatures:
Essential for snowmobile track studding
Hollow tool drills a clean hole through rubber tracks for all stud sizes
$ 36.98
Product Name: STUD INSTALLATION TOOLProduct Type: Stud Installation ToolBrand: WOODYSMFG Part
Number: STUD-INSTALLFeatures:
Great tool for installing and removing push-through studs
Aluminum handle rests in the palm of your hand so you can apply pressure needed to keep the stud from rotating
Each tool includes 2 hex bits
$ 134.98
Product Name: STUD SHARPENING TOOLProduct Type: Stud Sharpening ToolBrand: WOODYSMFG Part
Number: TOOL-SHARP-3Features:
Steel stud sharpener (not intended for carbide use)
Fits 3/8" drill
Sharpens in 30° angle
$ 25.99
Product Name: PRO SERIES BACKER INSTALLATION TOOLProduct Type: Pro Series Backer Installation ToolBrand: STUD BOYMFG Part Number: 2521-00Features: Designed to hold the single Pro Series Backers while installing studs Allows you to safely apply pressure to the backer and also keep the backer oriented for optimum results Helps when applying pressure to...
$ 18.98
Product Name: BOSS TWIST SCREW INSTALLATION TOOLProduct Type: Twist Screw Installation ToolBrand: WOODYSMFG Part
Number: WST-TOOL-8Features:
Required to install and remove Woody's Twist Screw Line
Machined steel
Fixed depth control to ensure proper installation
Tapered tip allows easy penetration and installation while preserving the lug
5/16” shank fits a 3/8” drill
$ 18.98
Product Name: ATTACK TWIST SCREW INSTALLATION TOOLProduct Type: Twist Screw Installation ToolBrand: WOODYSMFG Part
Number: WST-TOOL-6Features:
Required to install and remove Woody's Twist Screw Line
Machined steel
Fixed depth control to ensure proper installation
Tapered tip allows easy penetration and installation while preserving the lug
5/16” shank fits a 3/8” drill
$ 18.98
Product Name: GRIP-IT TWIST SCREW INSTALLATION TOOLProduct Type: Twist Screw Installation ToolBrand: WOODYSMFG Part
Number: WST-TOOL-4Features:
Required to install and remove Woody's Twist Screw Line
Machined steel
Fixed depth control to ensure proper installation
Tapered tip allows easy penetration and installation while preserving the lug
5/16” shank fits a 3/8” drill
$ 22.98
Product Name: SPRING TOOL 15"Product Type: Spring ToolBrand: WOODYSMFG Part
Number: SPR2-TOOL-LFeatures:
Heavy duty spring tool won't break or straighten out
Long enough to reach in difficult areas
With this tool you can now push, pull and twist springs on and off
$ 22.98
Product Name: SPRING TOOL 10"Product Type: Spring ToolBrand: WOODYSMFG Part
Number: SPR2-TOOL-SFeatures:
Heavy duty spring tool won't break or straighten out
Long enough to reach in difficult areas
With this tool you can now push, pull and twist springs on and off
$ 25.98
Product Name: T-NUT TOOLProduct Type: T-Nut PullerBrand: WOODYSMFG Part
Number: ATT-4290Features:
Reduces time required to stud track
Fits 3/8" square drives/drills and is available for 1/4"-20 t-nuts
$ 50.95
Product Name: PISTON CIRCLIP TOOL 22MMProduct Type: Circlip Installation ToolBrand: SP1MFG Part
Number: SM-12452-3Features:
Easy installation tool for circlips
Saves time and headaches from dealing with pliers and screw drivers
Significantly reduces damage done to the piston during clip installation
$ 49.95
Product Name: CIRCLIP INSTALLATION TOOL 20MMProduct Type: Circlip Installation ToolBrand: SP1MFG Part
Number: SM-12452Features:
Easy installation tool for circlips
Saves time and headaches from dealing with pliers and screw drivers
Significantly reduces damage done to the piston during clip installation
$ 48.95
Product Name: CIRCLIP INSTALLATION TOOL 18MMProduct Type: Circlip Installation ToolBrand: SP1MFG Part
Number: SM-12452-1Features:
Easy installation tool for circlips
Saves time and headaches from dealing with pliers and screw drivers
Significantly reduces damage done to the piston during clip installation
$ 119.95
Product Name: TRACK CLIP TOOLProduct Type: Track Clip ToolBrand: SP1MFG Part
Number: 04-149-13AFeatures:
Lever style track clip replacement tool
Quick and easy to operate
$ 59.98
Product Name: CLIP TOOL EXTENSION FOR 3" LUG TRACKSProduct Type: Track Clip Tool ExtensionBrand: WOODYSMFG Part
Number: TCT-30AC
$ 113.98
Product Name: TRACK CLIP TOOLProduct Type: Track Clip ToolBrand: WOODYSMFG Part Number: TCT-TOOLFeatures: Manufactured by KB Tooling exclusively for Woody's Can be used while track is still on sled Top is made of case hardened 1018 steel Anvil is made of 6061 T6 tempered aluminum with a hardened steel ball locked in...
$ 69.95
Product Name: SPIDER TOOL A/C RAPID RESPONSE S/MProduct Type: Spider Removal ToolBrand: SLPMFG Part
Number: 20-301Features:
Required to remove and re-torque spiders on all Comet clutches
$ 41.09
Product Name: CLUTCH HOLDER TOOL- POL A/CProduct Type: Drive Clutch HolderBrand: KORONISMFG Part
Number: 725-255
$ 40.95
Product Name: ALIGNMENT TOOL POLProduct Type: Alignment Tool Polaris S/MBrand: SP1MFG Part
Number: SM-12201
$ 28.17
Product Name: CLUTCH ALIGNMENT TOOL- SDProduct Type: Clutch Alignment ToolBrand: KORONISMFG Part
Number: 725-466Features:
The only alignment bar capable of aligning all offsets on all snowmobiles and ATV’s
Easy to use, no tool required
Can align engine alignment on most machines using the removable center adaptor
$ 47.74
Product Name: SPIDER TOOL A/C POL COMETProduct Type: Spider ToolBrand: KORONISMFG Part
Number: 725-285Features:
Required to remove and retorque spiders on all Comet clutches
$ 14.50
Product Name: EXHAUST SPRING TOOLProduct Type: Exhaust Spring ToolBrand: SP1MFG Part
Number: SM-12162Features:
A universal tool with coated handle and nickel chrome plated hook
$ 69.95
Product Name: SPIDER NUT TOOLProduct Type: Spider Nut ToolBrand: SLPMFG Part
Number: 20-74
$ 35.95
Product Name: SPIDER TOOL POLProduct Type: Spider Rebuild ToolBrand: SLPMFG Part
Number: 20-85Features:
Used in removing and installing pin and roller from Polaris spider
Not for Rapid Response clutch
$ 92.76
Product Name: SPIDER TOOL A/C COMET POLProduct Type: Spider ToolBrand: KORONISMFG Part
Number: 725-185Features:
Arctic Cat style with long detachable handle gives extra leverage
With handle removed, 1/2" breaker bar or torque wrench can be used
$ 25.95
Product Name: CLUTCH BUTTON TOOLProduct Type: Button ToolBrand: SP1MFG Part
Number: SM-12187
$ 42.26
Product Name: SPIDER NUT TOOL A/CProduct Type: Spider Nut ToolBrand: KORONISMFG Part
Number: 725-186
$ 83.95
Product Name: SPIDER NUT TOOLProduct Type: Spider Nut ToolBrand: SP1MFG Part
Number: SM-12520
$ 15.95
Product Name: CAM ARM BUSHING TOOLProduct Type: Cam Arm Bushing ToolBrand: SLPMFG Part
Number: 20-216Features:
Easily replace weight bushings
For Polaris, SLP MTX, Rooster weights
$ 119.95
Product Name: CLUTCH PRESS TOOL A/CProduct Type: Clutch Press ToolBrand: SLPMFG Part Number: 20-222Features: New design allows assembly and disassembly of all Rapid Reaction Secondary clutches without any adapters Tool is specified in many factory repair manuals as a required specialty tool for clutch compression Compact design can be used on the...
$ 99.95
Product Name: CLUTCH HOLDING TOOL POLProduct Type: Clutch HolderBrand: SLPMFG Part
Number: 20-162
$ 99.95
Product Name: CLUTCH HOLDING TOOL A/CProduct Type: Clutch HolderBrand: SLPMFG Part
Number: 20-197
$ 99.95
Product Name: CLUTCH PRESS TOOLProduct Type: Clutch Press ToolBrand: SLPMFG Part
Number: 20-143Features:
Designed to be used in a vice or mounted to a solid object
$ 59.95
Product Name: QRS HELIX REMOVAL TOOLProduct Type: QRS Helix Removal ToolBrand: STRAIGHTLINEMFG Part
Number: 151-106Features:
Allows removal and installation of the helix without removing the jackshaft on Rev XP models
$ 73.95
Product Name: GEAR RETAINER TOOL S-DProduct Type: Retainer ToolBrand: SP1MFG Part
Number: SM-12528Features:
Holds top sprocket and chain in place when removing jackshaft to work on driven clutch
Eliminates time to remove chaincase cover when removing jackshaft/driven clutch
$ 110.95
Product Name: QRS CLUTCH TOOL S-DProduct Type: QRS Tool KitBrand: SP1MFG Part
Number: SM-12527
$ 166.95
Product Name: QRS CLUTCH TOOL S-DProduct Type: QRS Tool KitBrand: SP1MFG Part
Number: SM-12526
$ 45.95
Product Name: PULLEY GUIDE TOOLProduct Type: Belt Drive Pulley Guide ToolBrand: SP1MFG Part
Number: SM-12498
$ 43.95
Product Name: PULLEY GUIDE TOOLProduct Type: Belt Drive Pulley Guide ToolBrand: SP1MFG Part
Number: SM-12497
$ 14.95
Product Name: PODIUM STAND TOOL TRAY BLACKProduct Type: Podium Stand Tool TrayBrand: FLY RACINGMFG Part
Number: 61-0763Features:
Tool and part tray
Heavy-duty metal construction with durable powder coat
10" x 12" x 2.5"
Fits FLY Racing Podium Stand
$ 69.95
Product Name: REAR FENDER BAG WITH TOOL ROLLProduct Type: Rear Fender Bag w/Tool RollBrand: NELSON-RIGGMFG Part Number: RG-025RFeatures: LIFETIME WARRANTY Universal fit for most dual-sport and Enduro motorcycles Top quality UltraMax™ polyester with maximum UV protection Reverse coil zippers to help keep out dust and dirt Clear PVC pocket under lid to...
$ 15.99
Product Name: PIPE SPRING TOOLProduct Type: Spring ToolBrand: FMFMFG Part
Number: 011231
$ 79.95
Product Name: THROTTLE POSITIONING SENSOR TOOLProduct Type: Power Flow Throttle Body KitBrand: TWIN AIRMFG Part Number: 160799Description: The PowerFlow Throttle Body Kit is an off-the-shelf, easy to install, throttle body performance kit that creates more power and better throttle response. The kit comes with two different performance options, one for low-mid range performance...
