Tools & Supplies425 Products
$ 39.95
Product Name: HIDE 'N' GO TRAIL TOOL KITProduct Type: Hide 'N' Go Safety AccessoriesBrand: STRAIGHTLINEMFG Part
Number: 185-118
$ 18.95
Product Name: TRAIL TOOL S-DProduct Type: Ski-Doo Trail Tool KitBrand: SP1MFG Part
Number: SM-12575Features:
Replaces OEM# 520-0014-99
THICKNESS:4.55mm, FOR 10, 13, 15, 26mm
Comes in all 2016-17 Ski Doo tool kits
$ 149.95
Product Name: 600/900 ACE CLUTCH TOOL KITProduct Type: 600/900 Ace Clutch Tool KitBrand: SP1MFG Part
Number: SM-12638
$ 9.50
Product Name: FUEL LINE DISCONNECT TOOLProduct Type: Fuel Line Disconnect ToolBrand: SP1MFG Part
Number: UP-12600-1
$ 14.50
Product Name: FUEL LINE DISCONNECT TOOLProduct Type: Fuel Line Release KitBrand: SP1MFG Part
Number: UP-12600
$ 10.95
Product Name: BELT REMOVAL TOOL TEAM W/TORX AND HEX BITSProduct Type: Belt Removal ToolBrand: SP1MFG Part
Number: SM-12574
$ 213.95
Product Name: P-DRIVE TOOL KITProduct Type: P-Drive Tool KitBrand: SP1MFG Part
Number: SM-12582
$ 13.95
Product Name: AXLE REMOVAL TOOL S-DProduct Type: Clutch Pin Removal ToolBrand: SP1MFG Part
Number: SM-12583
$ 10.41
Product Name: MIKUNI CHECK VALVE INSTALL TOOLProduct Type: Check Valve Grommet Install ToolBrand: WINDEROSAMFG Part
Number: 451470Features:
Works on grommets found in most Mikuni® Super BN carburetors and fuel pumps
$ 119.95
Product Name: KTM TOOL KITProduct Type: KTM/Husqvarna Tool KitBrand: CRUZ TOOLSMFG Part Number: RTKT1Description: The right mix of torx keys, hex keys and axle wrenches to fit KTM & Husqvarna motorcycles. The kit also contains combination wrenches, an adjustable wrench, locking pliers, 6-in-1 screwdriver, a mini ratchet and sockets, cable ties, mechanics wire,...
$ 59.95
Product Name: P-DRIVE CIRCLIP TOOLProduct Type: PDrive Circlip ToolBrand: STRAIGHTLINEMFG Part
Number: 151-112Features:
Used in conjunction with the P-Drive compressor can remove the primary spring clip
Heavy gauge steel
Fully machined to create a precision compression in these tight constraints
Fully zinc plated for rust prevention and corrosion protection
$ 7.50
Product Name: BELT REMOVAL TOOLProduct Type: Belt Removal ToolBrand: SP1MFG Part
Number: SM-12600
$ 46.95
Product Name: PULLEY GUIDE TOOLProduct Type: Belt Drive Pulley Guide ToolBrand: SP1MFG Part
Number: SM-12571
$ 20.99
Product Name: KEIHIN FCR CARBURETOR TOOLProduct Type: Keihin FCR Carburetor ToolBrand: MOTION PROMFG Part Number: 08-0181Features: Contains longer bits for reaching into recessed cavities to adjust Keihin FCR Ideal for trail riders and garage mechanics alike Includes 6mm hex for main jets, long reach straight slot for pilot jets & 3mm Allen...
$ 72.99
Product Name: METRIC MULTI-PURPOSE TOOLProduct Type: Metric Multi-Purpose ToolBrand: MOTION PROMFG Part Number: 08-0161Features: The perfect addition to any fanny pack Use the Metric "MP" to remove 8, 10, 12, 14 mm bolts, phillips or slotted screws, and 5 and 6 mm hex bolts The American "MP" kit contains phillips, flat allen,...
$ 29.99
Product Name: PILOT SCREW ADJUSTING TOOLProduct Type: Pilot Screw Adjusting ToolBrand: MOTION PROMFG Part
Number: 08-0119Features:
Designed for hard-to-reach air/fuel mixture screws
110" angled head extends reach 1"
Length is 17" with a straight slot blade tip
$ 33.95
Product Name: SHEAVE CLAMP TOOL 3/PKProduct Type: Sheave Clamp ToolBrand: SP1MFG Part
Number: SM-12046Features:
Includes pry bar, sheave clamp and stem spacer
Removes spring tension from cam arms for quick weight changes
$ 17.95
Product Name: 3-WAY T HANDLE WRENCHProduct Type: 3-Way T-Handle WrenchBrand: CRUZ TOOLSMFG Part Number: PW1Description: You’ll work quickly with this mini T-style wrench with the common 8, 10, and 12mm socket sizes. At 5.5” long, it stores easily making a great travel tool that you’ll also find handy in the garage. This 3-way...
$ 19.95
Product Name: OUTBACK'R METRIC TOOL SETProduct Type: Outback'r M14 ToolBrand: CRUZ TOOLSMFG Part Number: OM14Description: Enough tools to get you out of a jam, but not weigh you down! The Outback’R multi-tool is a must-have for any metric motorcycle, UTV, ATV, PWC, or Snowmobile. The Outback’R OM14, provides 14 tools in a 3.5”...
$ 60.95
Product Name: FLOAT 3 SHOCK SEALHEAD TOOLProduct Type: Shock Sealhead ToolBrand: FOXMFG Part
Number: 398-00-558
$ 92.95
Product Name: DSC INSTALL TOOLProduct Type: DSC Install ToolBrand: FOXMFG Part
Number: 398-00-267
$ 105.95
Product Name: BEARING INSTALL TOOL MAX VOLUME BEARING/SEALHEADProduct Type: Bearing Install ToolBrand: FOXMFG Part
Number: 398-00-501
$ 69.95
Product Name: BEARING INSTALL TOOL STD VOLUME BEARING/SEALHEADProduct Type: Bearing Install ToolBrand: FOXMFG Part
Number: 398-00-249
$ 74.95
Product Name: CLUTCH ALIGNMENT TOOL 1-7/16" BELT WIDTHProduct Type: Clutch Alignment ToolBrand: VENOM PRODUCTSMFG Part
Number: 930721Features:
The only alignment bar capable of aligning all offsets on all snowmobiles and ATV’s
Easy to use, no tool required
Can align engine alignment on most machines using the removable center adaptor
$ 7.95
Product Name: BELT REMOVAL TOOLProduct Type: Belt Removal ToolBrand: VENOM PRODUCTSMFG Part
Number: 930002
$ 78.95
Product Name: COMPRESSION TOOLProduct Type: Compression ToolBrand: VENOM PRODUCTSMFG Part
Number: 930001Features:
Easy to use
Corrosion resistant
Aircraft quality steel
Compact, durable, impact resistant
$ 7.95
Product Name: BELT REMOVAL TOOL TIEDProduct Type: Belt Removal ToolBrand: VENOM PRODUCTSMFG Part
Number: 650343
$ 4.95
Product Name: BELT REMOVAL TOOL T27 TORXProduct Type: Belt Removal ToolBrand: VENOM PRODUCTSMFG Part
Number: 650192
$ 89.95
Product Name: CLUTCH ALIGNMENT TOOLProduct Type: Clutch Alignment ToolBrand: STRAIGHTLINEMFG Part
Number: 151-102Features:
The only alignment bar capable of aligning all offsets on all snowmobiles and ATV’s
Easy to use, no tool required
Can align engine alignment on most machines using the removable center adaptor
$ 89.95
Product Name: SD CLUTCH TOOL 08-13 QRS S/MProduct Type: QRS Secondary Clutch Spring CompressorBrand: STRAIGHTLINEMFG Part Number: 151-107Features: Simple and effective tool for removing helix and spring Compresses QRS clutch without removing entire jackshaft Works with both inner thread or outer thread clutches Safe rubber style expandable bushing for inner thread clutches...
$ 23.98
Product Name: INDEXING TOOL FOR SQUARE SUPPORT PLATESProduct Type: Indexing ToolBrand: WOODYSMFG Part
Number: SPI-TOOL-5Description:
For Square Support PlatesFeatures:
Aligns support plates with track edges to increase longevity of the stud and support plate
Parallel edges are essential to proper stud performance
Fits 3/8" ratchet drive
$ 64.98
Product Name: TRACK TENSION TOOLProduct Type: Track Tension ToolBrand: WOODYSMFG Part
Number: TRAK-TOOLFeatures:
Optimize performance and prolong the life of your track with regular use of this handy tool
Set the weight and measure the tension of your track
Follow recommendation in your snowmobile owner's manual
$ 14.98
Product Name: TRACK DRILL TOOLProduct Type: Universal Track DrillBrand: WOODYSMFG Part
Number: DRIL-UNIVFeatures:
Essential for snowmobile track studding
Hollow tool drills a clean hole through rubber tracks for all stud sizes
$ 36.98
Product Name: STUD INSTALLATION TOOLProduct Type: Stud Installation ToolBrand: WOODYSMFG Part
Number: STUD-INSTALLFeatures:
Great tool for installing and removing push-through studs
Aluminum handle rests in the palm of your hand so you can apply pressure needed to keep the stud from rotating
Each tool includes 2 hex bits
$ 134.98
Product Name: STUD SHARPENING TOOLProduct Type: Stud Sharpening ToolBrand: WOODYSMFG Part
Number: TOOL-SHARP-3Features:
Steel stud sharpener (not intended for carbide use)
Fits 3/8" drill
Sharpens in 30° angle
$ 25.99
Product Name: PRO SERIES BACKER INSTALLATION TOOLProduct Type: Pro Series Backer Installation ToolBrand: STUD BOYMFG Part Number: 2521-00Features: Designed to hold the single Pro Series Backers while installing studs Allows you to safely apply pressure to the backer and also keep the backer oriented for optimum results Helps when applying pressure to...
$ 18.98
Product Name: BOSS TWIST SCREW INSTALLATION TOOLProduct Type: Twist Screw Installation ToolBrand: WOODYSMFG Part
Number: WST-TOOL-8Features:
Required to install and remove Woody's Twist Screw Line
Machined steel
Fixed depth control to ensure proper installation
Tapered tip allows easy penetration and installation while preserving the lug
5/16” shank fits a 3/8” drill
$ 18.98
Product Name: ATTACK TWIST SCREW INSTALLATION TOOLProduct Type: Twist Screw Installation ToolBrand: WOODYSMFG Part
Number: WST-TOOL-6Features:
Required to install and remove Woody's Twist Screw Line
Machined steel
Fixed depth control to ensure proper installation
Tapered tip allows easy penetration and installation while preserving the lug
5/16” shank fits a 3/8” drill
$ 22.98
Product Name: SPRING TOOL 15"Product Type: Spring ToolBrand: WOODYSMFG Part
Number: SPR2-TOOL-LFeatures:
Heavy duty spring tool won't break or straighten out
Long enough to reach in difficult areas
With this tool you can now push, pull and twist springs on and off
$ 22.98
Product Name: SPRING TOOL 10"Product Type: Spring ToolBrand: WOODYSMFG Part
Number: SPR2-TOOL-SFeatures:
Heavy duty spring tool won't break or straighten out
Long enough to reach in difficult areas
With this tool you can now push, pull and twist springs on and off
$ 25.98
Product Name: T-NUT TOOLProduct Type: T-Nut PullerBrand: WOODYSMFG Part
Number: ATT-4290Features:
Reduces time required to stud track
Fits 3/8" square drives/drills and is available for 1/4"-20 t-nuts
$ 50.95
Product Name: PISTON CIRCLIP TOOL 22MMProduct Type: Circlip Installation ToolBrand: SP1MFG Part
Number: SM-12452-3Features:
Easy installation tool for circlips
Saves time and headaches from dealing with pliers and screw drivers
Significantly reduces damage done to the piston during clip installation
$ 49.95
Product Name: CIRCLIP INSTALLATION TOOL 20MMProduct Type: Circlip Installation ToolBrand: SP1MFG Part
Number: SM-12452Features:
Easy installation tool for circlips
Saves time and headaches from dealing with pliers and screw drivers
Significantly reduces damage done to the piston during clip installation
$ 48.95
Product Name: CIRCLIP INSTALLATION TOOL 18MMProduct Type: Circlip Installation ToolBrand: SP1MFG Part
Number: SM-12452-1Features:
Easy installation tool for circlips
Saves time and headaches from dealing with pliers and screw drivers
Significantly reduces damage done to the piston during clip installation
$ 119.95
Product Name: TRACK CLIP TOOLProduct Type: Track Clip ToolBrand: SP1MFG Part
Number: 04-149-13AFeatures:
Lever style track clip replacement tool
Quick and easy to operate
$ 59.98
Product Name: CLIP TOOL EXTENSION FOR 3" LUG TRACKSProduct Type: Track Clip Tool ExtensionBrand: WOODYSMFG Part
Number: TCT-30AC
$ 113.98
Product Name: TRACK CLIP TOOLProduct Type: Track Clip ToolBrand: WOODYSMFG Part Number: TCT-TOOLFeatures: Manufactured by KB Tooling exclusively for Woody's Can be used while track is still on sled Top is made of case hardened 1018 steel Anvil is made of 6061 T6 tempered aluminum with a hardened steel ball locked in...
$ 69.95
Product Name: SPIDER TOOL A/C RAPID RESPONSE S/MProduct Type: Spider Removal ToolBrand: SLPMFG Part
Number: 20-301Features:
Required to remove and re-torque spiders on all Comet clutches
$ 41.09
Product Name: CLUTCH HOLDER TOOL- POL A/CProduct Type: Drive Clutch HolderBrand: KORONISMFG Part
Number: 725-255
$ 40.95
Product Name: ALIGNMENT TOOL POLProduct Type: Alignment Tool Polaris S/MBrand: SP1MFG Part
Number: SM-12201
