V-Twin11499 Products
$ 14.50
Product Name: HYDRAULIC BRAKE BLEEDERProduct Type: Hydraulic Brake BleederBrand: MOTION PROMFG Part
Number: 08-0143Features:
Will aid in the bleeding and servicing of hydraulic brakes
Makes bleeding brakes a one man job
The unique check valve allows fluid and air to escape while preventing air from re-entering the system
$ 37.50
Product Name: FORK SPRING TOOLProduct Type: Springer Fork Spring ToolBrand: MOTION PROMFG Part
Number: 08-0144Features:
Assists in the disassembly and assembly of springer-type front forks on Harley-Davidson motorcycles
Made in the USA
$ 20.99
Product Name: SIDE CASE COVER PULLERProduct Type: Side Case Cover PullerBrand: MOTION PROMFG Part Number: 08-0153Features: Used to remove the right side-case cover Will fit late model Harley-Davidson motorcycles, including all 1970 and later Big Twin models and 1990 and later Sportster models Includes bracket, puller bolt and set screws Made in...
$ 17.85
Product Name: SPOKE WRENCH 6.5MM X 6.8MMProduct Type: Spoke WrenchBrand: MOTION PROMFG Part Number: 08-0157Features: Features unique square end openings which grip the spoke nipple on all four sides instead of just two, assuring that the nipple corners are not rounded off during tightening With many nipples being made from aluminum or...
$ 8.99
Product Name: DRIVE T-HANDLE 1/4"Product Type: Drive T-HandleBrand: MOTION PROMFG Part
Number: 08-0158Features:
T-handle socket drivers allow optional ways to use any 1/4" drive attachments such as sockets, hex drives, crow's foot or swivels
Manufactured from chrome vanadium tool steel with carbon steel T-Handles
Hard nickel - pewter finish
Lifetime warranty
$ 11.99
Product Name: DRIVE T-HANDLE 3/8"Product Type: Drive T-HandleBrand: MOTION PROMFG Part
Number: 08-0159Features:
T-handle socket drivers allow optional ways to use any 1/4" drive attachments such as sockets, hex drives, crow's foot or swivels
Manufactured from chrome vanadium tool steel with carbon steel T-Handles
Hard nickel - pewter finish
Lifetime warranty
$ 10.99
Product Name: CABLE LUBERProduct Type: Cable LuberBrand: MOTION PROMFG Part
Number: 08-0182Features:
Injects lubricants into cable with a minimum of mess
Makes cables work as good as new
Inexpensive
$ 4.50
Product Name: VALVE CORE REMOVERProduct Type: Valve Core RemoverBrand: MOTION PROMFG Part
Number: 08-0183Features:
Made from Hex Steel
Allows for easy removal and installation of standard valve cores
$ 22.99
Product Name: SNAP RING PLIERSProduct Type: Snap Ring PliersBrand: MOTION PROMFG Part
Number: 08-0186Features:
Economical pliers that easily does both inside and outside opening snap rings or clips
Includes 3 extra sets of tips, 1 additional straight tip and 2 offset or angled tips
$ 129.99
Product Name: COMPRESSION TESTERProduct Type: Compression TesterBrand: MOTION PROMFG Part
Number: 08-0188Description:
10, 12, 14 and 18mm screw-in adapters on a 12’’ flexible hose and air release quick-coupler make this tester fast and easy to use in testing snowmobiles, motorcycles, chain-saws, lawnmowers and outboards
$ 16.99
Product Name: ROCKER BOX COVER WRENCHProduct Type: Rocker Box Cover WrenchBrand: MOTION PROMFG Part Number: 08-0220Features: Designed to reach hard to get 3/16 in. allen on the rocker boxes of Big Twin, Sportster & Buell motorcycles Features a 3/8" drive for use with torque wrench Vinyl cover offers comfort and minimizes chances...
$ 79.99
Product Name: 90 DEGREE 1/4" HEX DRIVERProduct Type: 90° 1/4" Hex DriverBrand: MOTION PROMFG Part Number: 08-0229Features: Precision made of high grade aluminum and stainless steel Designed for hard to reach pilot air screws Gear driven 1/4" hex, 17.5" long Includes five hex drive bits - Straight Slot, Phillips, D-Shaped pilot screw...
$ 3.99
Product Name: 90 DEGREE 1/4" HEX DRIVER D-SHAPE BITProduct Type: Hex Driver D-Shaped BitsBrand: MOTION PROMFG Part Number: 08-0242Features: Precision made of high grade aluminum and stainless steel Designed for hard to reach pilot air screws Gear driven 1/4" hex, 17.5" long Includes five hex drive bits - straight slot, phillips, D-shaped...
$ 5.99
Product Name: GEAR SET FOR CARB TOOLProduct Type: 90° 1/4" Hex Driver Gear SetBrand: MOTION PROMFG Part
Number: 08-0246
$ 22.99
Product Name: WHEEL BEARING REMOVER LARGE DRIVER RODProduct Type: Bearing Removal Set Driver RodBrand: MOTION PROMFG Part
Number: 08-0260
$ 7.99
Product Name: WHEEL BEARING REMOVER 3/4"Product Type: Wheel Bearing RemoverBrand: MOTION PROMFG Part
Number: 08-0265
$ 8.50
Product Name: BEARING REMOVER 25MMProduct Type: Bearing Removal Set ColletBrand: MOTION PROMFG Part
Number: 08-0267
$ 27.99
Product Name: MASTER CYLINDER SNAP-RING PLIERSProduct Type: Master Cylinder Snap-Ring PliersBrand: MOTION PROMFG Part Number: 08-0279Features: Allows removal of internal snap rings used in hydraulic master cylinders Replaces 07914-SA50001 and AKS-316-2010 Can be used to remove and replace small to medium internal snap rings up to 50mm deep, including those used for...
$ 4.99
Product Name: FORK SEAL BULLET SET 36MM (RED)Product Type: Fork Seal BulletBrand: MOTION PROMFG Part
Number: 08-0273Features:
Protects the fork seal and wiper of inverted forks from damage by the bushing groove during installation
Saves time by eliminating the need to wrap the fork tube with tape
$ 4.99
Product Name: FORK SEAL BULLET SET 41MM (BLUE)Product Type: Fork Seal BulletBrand: MOTION PROMFG Part
Number: 08-0274Features:
Protects the fork seal and wiper of inverted forks from damage by the bushing groove during installation
Saves time by eliminating the need to wrap the fork tube with tape
$ 4.99
Product Name: FORK SEAL BULLET SET 43MM (GREEN)Product Type: Fork Seal BulletBrand: MOTION PROMFG Part
Number: 08-0275Features:
Protects the fork seal and wiper of inverted forks from damage by the bushing groove during installation
Saves time by eliminating the need to wrap the fork tube with tape
$ 4.99
Product Name: FORK SEAL BULLET SET 45MM (YELLOW)Product Type: Fork Seal BulletBrand: MOTION PROMFG Part
Number: 08-0276Features:
Protects the fork seal and wiper of inverted forks from damage by the bushing groove during installation
Saves time by eliminating the need to wrap the fork tube with tape
$ 4.99
Product Name: FORK SEAL BULLET SET 46MM (BLACK)Product Type: Fork Seal BulletBrand: MOTION PROMFG Part
Number: 08-0277Features:
Protects the fork seal and wiper of inverted forks from damage by the bushing groove during installation
Saves time by eliminating the need to wrap the fork tube with tape
$ 4.99
Product Name: FORK SEAL BULLET SET 47MM (WHITE)Product Type: Fork Seal BulletBrand: MOTION PROMFG Part
Number: 08-0278Features:
Protects the fork seal and wiper of inverted forks from damage by the bushing groove during installation
Saves time by eliminating the need to wrap the fork tube with tape
$ 17.85
Product Name: SPOKE WRENCH 5.0MM X 7.0MMProduct Type: Spoke WrenchBrand: MOTION PROMFG Part Number: 08-0296Features: Features unique square end openings which grip the spoke nipple on all four sides instead of just two, assuring that the nipple corners are not rounded off during tightening With many nipples being made from aluminum or...
$ 9.50
Product Name: TAPPET TOOLProduct Type: Tappet ToolBrand: MOTION PROMFG Part Number: 08-0339Features: For use on big twin (excluding twin cam) with slotted screw tappet oil filter screen cover Designed for use with 7/16" combination wrench to allow for maximum rotation without touching engine cases O-ring design retains the tool in wrench or...
$ 101.99
Product Name: SEAL MATE 12/PKProduct Type: Seal Mate Fork Seal CleanerBrand: MOTION PROMFG Part
Number: 08-0356Features:
Easy way to keep your fork seals clean and debris free
Extract dirt or debris trapped between fork seal and tube
Will work on conventional and up-side down forks
$ 84.99
Product Name: LIGHTWEIGHT CHAIN BREAKER AND CHAIN PRESS TOOLProduct Type: T-6 Chain ToolBrand: MOTION PROMFG Part Number: 08-0358Features: Breaks 520 to 530 chain Use for pressing on and off 520 and some 525 master link side plates Will push link pin completely through link/side plate Body forged from high-strength 4130 chrome-moly Body...
$ 7.99
Product Name: DUAL DRIVE MINI T-HANDLE 1/4" DRIVEProduct Type: Dual Drive Mini T-HandleBrand: MOTION PROMFG Part Number: 08-0359Features: Use T-Handle drive to tighten/loosen fasteners and shaft drive for quick installation/removal of fasteners For tight access and easy transport Use with 1/4” or 3/8” drive sockets, hex drives, swivels, etc. Chrome-vanadium tool steel...
$ 9.99
Product Name: DUAL DRIVE MINI T-HANDLE 3/8" DRIVEProduct Type: Dual Drive Mini T-HandleBrand: MOTION PROMFG Part Number: 08-0360Features: Use T-Handle drive to tighten/loosen fasteners and shaft drive for quick installation/removal of fasteners For tight access and easy transport Use with 1/4” or 3/8” drive sockets, hex drives, swivels, etc. Chrome-vanadium tool steel...
$ 18.50
Product Name: REAR WHEEL ALIGNMENT TOOLProduct Type: Rear Wheel Alignment ToolBrand: MOTION PROMFG Part Number: 08-0368Features: For use on Softail, Sportster, and Dyna Designed to help set rear wheel alignment Fast, accurate and easy to use Eliminates the need to use a tape measure Proper wheel alignment extends chain/sprocket and belt life...
$ 49.99
Product Name: ADJUSTABLE TORQUE WRENCH ADAPTERProduct Type: Adjustable Torque Wrench AdapterBrand: MOTION PROMFG Part Number: 08-0380Features: Torque any fastener with a combination wrench or Allen wrench Will work with 6mm (1.4") through 19 (3/4") combination wrenches Heat treated steel with black oxide finish 3/8" square drive is rated for a maximum torque...
$ 8.99
Product Name: WHEEL BEARING REMOVER 1"Product Type: Bearing Removal Set ColletBrand: MOTION PROMFG Part
Number: 08-0381
$ 4.99
Product Name: DEEP WELL T-HANDLE 3-4MM ALLEN BITProduct Type: Deep Well T-Handle BitsBrand: MOTION PROMFG Part
Number: 08-0382Features:
Hard nickel pewter finish
Sold individually
$ 19.99
Product Name: TRI-DRIVE MINI T-HANDLEProduct Type: Tri-Drive Mini T-HandleBrand: MOTION PROMFG Part Number: 08-0389Description: Use T-handle drive to tighten/loosen fasteners and shaft drive for quick installation/removal of fastenersFeatures: 1/4” drive has a compact 6” drive shaft length Compact size for use in tight spaces & easy to carry Includes 8mm, 10mm, 12mm...
$ 8.50
Product Name: SEALMATE FORK SEAL CLEANERProduct Type: Seal Mate Fork Seal CleanerBrand: MOTION PROMFG Part
Number: 08-0395Features:
Easy way to keep your fork seals clean and debris free
Extract dirt or debris trapped between fork seal and tube
Will work on conventional and up-side down forks
$ 44.99
Product Name: SPOON TYPE TIRE IRON SET 10"Product Type: Spoon Tire IronBrand: MOTION PROMFG Part Number: 08-0409Features: Unique "spoon" shape on the end of this tire iron makes tire mounting and removal a breeze Large curved end fits securely in the hand Heavy duty silver zinc plated finish Small enough to fit...
$ 47.99
Product Name: WHEEL BEARING REMOVER KIT 4PC SETProduct Type: Wheel Bearing Remover KitBrand: MOTION PROMFG Part
Number: 08-0410Features:
Set uses a split collet design to remove radial ball bearings on Harley-Davidson and American V-Twin motorcycles
All 2007 Softail models (exc.Springer models) use a 25mm radial ball bearing on the front wheel
$ 34.99
Product Name: FORK ALIGN TOOLProduct Type: Fork Align ToolBrand: MOTION PROMFG Part Number: 08-0412Features: Quick and easy to use tool for aligning front forks to ensure they are parallel from top to bottom Proper alignment reduces sticking, enhancing fork performance Knurled adjustment screws for easy setup Reduces seal and bushing wear Will...
$ 29.99
Product Name: TIPROLIGHT TITANIUM COMBINATION WRENCH 8MMProduct Type: TiProlight Titanium WrenchBrand: MOTION PROMFG Part
Number: 08-0461Features:
These super-light wrenches weigh less than one quarter of the weight of standard steel wrenches
Made from tool grade titanium alloy
Titanium alloy will never rust or corrode
$ 32.99
Product Name: TIPROLIGHT TITANIUM COMBINATION WRENCH 10MMProduct Type: TiProlight Titanium WrenchBrand: MOTION PROMFG Part
Number: 08-0462Features:
These super-light wrenches weigh less than one quarter of the weight of standard steel wrenches
Made from tool grade titanium alloy
Titanium alloy will never rust or corrode
$ 51.99
Product Name: TIPROLIGHT TITANIUM COMBINATION WRENCH 13MMProduct Type: TiProlight Titanium WrenchBrand: MOTION PROMFG Part
Number: 08-0464Features:
These super-light wrenches weigh less than one quarter of the weight of standard steel wrenches
Made from tool grade titanium alloy
Titanium alloy will never rust or corrode
$ 54.99
Product Name: TIPROLIGHT TITANIUM COMBINATION WRENCH 14MMProduct Type: TiProlight Titanium WrenchBrand: MOTION PROMFG Part
Number: 08-0465Features:
These super-light wrenches weigh less than one quarter of the weight of standard steel wrenches
Made from tool grade titanium alloy
Titanium alloy will never rust or corrode
$ 159.99
Product Name: TI PROLIGHT TITANIUM WRENCHES 8 10 12 14 SETProduct Type: TiProlight Titanium Combination 4 Piece Wrench SetBrand: MOTION PROMFG Part Number: 08-0466Features: These super-light wrenches weight less than one quarter of the wright of standard steel wrenches Made from tool grade titanium alloy Extremely lightweight and compact design is perfect...
$ 104.99
Product Name: PBR CHAIN BREAKERProduct Type: PBR Chain BreakerBrand: MOTION PROMFG Part Number: 08-0470Description: PRESS, BREAK, RIVETFeatures: Innovative design will Press, Break and Rivet 520, 525, and 530 chains with one convenient tool Versatile design will remove chain pins, press master-link plates and rivet hollow nose and soft nose (quad stake) master...
$ 6.99
Product Name: PBR BREAK PINProduct Type: PBR Chain Breaker PinBrand: MOTION PROMFG Part
Number: C08-0470C
$ 54.99
Product Name: DELUXE PISTON PIN PULLERProduct Type: Deluxe Piston Pin PullerBrand: MOTION PROMFG Part Number: 08-0472Features: Interchangeable piston adapters for use on both long skirt and short skirt (slipper) pistons Fits all piston pins from 12 mm (1/2”) to 24 mm (1”) Made of 6061 aluminum with non-marring aluminum adapters and durable...
$ 274.99
Product Name: TI PROLIGHT TITANIUM WRENCHES 8 10 12 13 SETProduct Type: TiProlight Titanium Combination 4 Piece Wrench SetBrand: MOTION PROMFG Part Number: 08-0478Features: These super-light wrenches weight less than one quarter of the wright of standard steel wrenches Made from tool grade titanium alloy Extremely lightweight and compact design is perfect...
$ 28.99
Product Name: MINI BLEEDER 8MMProduct Type: Mini Brake BleederBrand: MOTION PROMFG Part Number: 08-0482Features: Combines wrench and bleeder valve into one convenient and compact tool Fits most 8mm bleeder nipples Bleeds brake systems and hydraulic clutch systems Internal check valve for fast easy bleeding Anodized billet aluminum handle with chrome moly steel...
$ 52.99
Product Name: RINGER FORK SEAL DRIVER 35/36MMProduct Type: Ringer Fork Seal DriverBrand: MOTION PROMFG Part Number: 08-0486Features: Innovative design makes tool easier and safer to use than old fashioned pin aligned drivers Anodized aluminum locking ring features knurled finish for secure no-slip grip and positively locks body halves together during use No...
