rox

Product Name:   ANTI-VIBRATION HANDLEBAR RISERProduct Type:   BMW Anti-Vibration Handlebar RiserBrand:   ROXMFG Part Number:   1R-AV2GSAFeatures:     Fits 2013 and up BMW R1200GS/GSA models 2" of rise, 1¼" stem Accepts 1¼" handlebar Reduces bar vibration, hand tingling and numbness Improves control when off-road riding Risers can be positioned forward/backward depending on rider preference These bar...

Product Name:   ANTI-VIBRATION HANDLEBAR RISER 2-1/4"X1-1/8"X1-1/8"Product Type:   Anti-Vibration Handlebar RiserBrand:   ROXMFG Part Number:   1R-AV2PPDescription:   Anti-Vibe Risers may interfere with aftermarket large capacity fuel tanks, and some steering stem clamp configurations (use standard pivoting risers). These risers use 8mm clamping bolts. Always check and confirm that your bike has adequate cable and brake line...

Product Name:   ASG GAUNTLET HANDGUARDSProduct Type:   ASG Gauntlet Style HandguardsBrand:   ROXMFG Part Number:   G1-AS-KFeatures:     Intended to be used with any handguard system including wrap around bar end or full wrap guards Can be used with Rox Flex-Tec handguard kits as hand guards required for attachment Keeps hands/controls protected from debris, mud, and...

Product Name:   BAR PAD GREY/BLACKProduct Type:   Snowmobile Bar PadBrand:   ROXMFG Part Number:   2BP4-GRYFeatures:     Designed to fit most extruded pivot risers Compatible with all ROX risers

Product Name:   BAR PAD WHITE/GREY/BLACKProduct Type:   Snowmobile Bar PadBrand:   ROXMFG Part Number:   2BP4-WHTFeatures:     Designed to fit most extruded pivot risers Compatible with all ROX risers

Product Name:   ELITE ANTI-VIBRATION RISER BLACKProduct Type:   Elite Series Anti-Vibration RisersBrand:   ROXMFG Part Number:   1R-AV2SEKDescription:   These versatile Risers allow you to clamp a 7/8" diameter handlebar or you can remove the 7/8" reducers and then clamp an 1- 1/8" aluminum "fatbar". If you are thinking of going to a fatbar after you bend...

Product Name:   ELITE ANTI-VIBRATION RISER NATURALProduct Type:   Elite Series Anti-Vibration RisersBrand:   ROXMFG Part Number:   1R-AV2SEDescription:   These versatile Risers allow you to clamp a 7/8" diameter handlebar or you can remove the 7/8" reducers and then clamp an 1- 1/8" aluminum "fatbar". If you are thinking of going to a fatbar after you bend...

Product Name:   ELITE SERIES PIVOT HANDLEBAR RISER 2" (BLACK)Product Type:   Pivoting RisersBrand:   ROXMFG Part Number:   1R-P2PPKDescription:   A great bar position solution and common choice for the XR650L, Suzuki V-Strom, BMW GS 1150 & 1100, KLR, DR-Z and many more. Also a popular riser for anyone growing out of their current trail bike, from...

Product Name:   ELITE SERIES PIVOT HANDLEBAR RISER 2" (BLACK)Product Type:   Pivoting RisersBrand:   ROXMFG Part Number:   1R-P2SEKDescription:   A great bar position solution and common choice for the XR650L, Suzuki V-Strom, BMW GS 1150 & 1100, KLR, DR-Z and many more. Also a popular riser for anyone growing out of their current trail bike, from...

Product Name:   ELITE SERIES PIVOT HANDLEBAR RISER 2" (BLACK)Product Type:   Pivoting RisersBrand:   ROXMFG Part Number:   1R-P2SSDescription:   A great bar position solution and common choice for the XR650L, Suzuki V-Strom, BMW GS 1150 & 1100, KLR, DR-Z and many more. Also a popular riser for anyone growing out of their current trail bike, from...

Product Name:   ELITE SERIES PIVOT HANDLEBAR RISER 2" (NATURAL)Product Type:   Pivoting RisersBrand:   ROXMFG Part Number:   1R-P2PPDescription:   A great bar position solution and common choice for the XR650L, Suzuki V-Strom, BMW GS 1150 & 1100, KLR, DR-Z and many more. Also a popular riser for anyone growing out of their current trail bike, from...

Product Name:   ELITE SERIES PIVOT HANDLEBAR RISER 2" (NATURAL)Product Type:   Pivoting RisersBrand:   ROXMFG Part Number:   1R-P2SEDescription:   A great bar position solution and common choice for the XR650L, Suzuki V-Strom, BMW GS 1150 & 1100, KLR, DR-Z and many more. Also a popular riser for anyone growing out of their current trail bike, from...

Product Name:   ELITE SERIES PIVOT HANDLEBAR RISER 2" (NATURAL)Product Type:   Pivoting RisersBrand:   ROXMFG Part Number:   1R-P2SSNDescription:   A great bar position solution and common choice for the XR650L, Suzuki V-Strom, BMW GS 1150 & 1100, KLR, DR-Z and many more. Also a popular riser for anyone growing out of their current trail bike, from...

Product Name:   HANDLEBAR PIVOTING RISER BLACK1-3/4"X1-1/8"X1-1/8"Product Type:   Low Pro Handlebar Pivoting RisersBrand:   ROXMFG Part Number:   3R-P2PPLKDescription:   Low Pro 1¾" center to center rise for BMW F800GS and KTM's. This riser was developed around the F800GS ABS model. Riser barely clears the stock F800GS handlebar clamps and can be pivoted to your desired fore...

Product Name:   HANDLEBAR PIVOTING RISER DELUXE 2"X7/8"X7/8"Product Type:   Deluxe Handlebar Pivoting RisersBrand:   ROXMFG Part Number:   3R-P2SSMDescription:   This Rox Riser will fit in any application with 7/8" bars. KLR650, XR650L, V-Strom, BMW 1100 & 1150, Triumph, even the Buell's. In order to properly clamp into the Buell's triangular handlebar clamps the 7/8" diameter post...

Product Name:   HANDLEBAR PIVOTING RISER NATURAL 1-3/4"X1-1/8"X1-1/8"Product Type:   Low Pro Handlebar Pivoting RisersBrand:   ROXMFG Part Number:   3R-P2PPLDescription:   Low Pro 1¾" center to center rise for BMW F800GS and KTM's. This riser was developed around the F800GS ABS model. Riser barely clears the stock F800GS handlebar clamps and can be pivoted to your desired...

Product Name:   OFFSET BLOCK RISER 1-1/4" RISE WITH REDUCERProduct Type:   Offset RiserBrand:   ROXMFG Part Number:   3R-B12POEDescription:   Rox new offset block Riser raises your bar straight up 1¼" (vertical) or up 1" and back 1" when installed the other direction. Rox Pro-Offset risers have an oblong hole so that they will fit virtually any...

Product Name:   PIVOTING BAR RISER 2" (BLACK)Product Type:   Yamaha Pivoting Bar RiserBrand:   ROXMFG Part Number:   1R-P2PPS10KFeatures:     These 2" Pivoting Bar Risers are specifically made to fit the angled bar clamps on the 2014+ Yamaha Super Tenére Easy install works without replacing any of the stock cables 2" center-to-center rise Virtually unlimited bar...

Product Name:   PIVOTING BAR RISER 2" (SILVER)Product Type:   BMW Pivoting Bar RiserBrand:   ROXMFG Part Number:   1R-P13R-2125Features:     These 2" Pivoting Bar Risers are designed to perfectly fit the BMW R1200GS / GSA Watercooled Bikes Easy install works without replacing any of the stock cables Custom made to fit the 1 1/4" Bar on...

Product Name:   PIVOTING BAR RISER 2" (SILVER)Product Type:   Yamaha Pivoting Bar RiserBrand:   ROXMFG Part Number:   1R-P2PPS10AFeatures:     These 2" Pivoting Bar Risers are specifically made to fit the angled bar clamps on the 2014+ Yamaha Super Tenére Easy install works without replacing any of the stock cables 2" center-to-center rise Virtually unlimited bar...

Product Name:   PIVOTING HANDLEBAR RISER BLACK 2" RISEProduct Type:   Street Pivoting Handlebar RiserBrand:   ROXMFG Part Number:   4R-P2CC01Description:   Rox unique patented riser design allows you to pivot the riser in the original clamps and pivot the bar orientation in the top clamps of the riser. This provides an incredible amount of bar positions for...

Product Name:   PIVOTING HANDLEBAR RISER BLACK 3" RISEProduct Type:   Street Pivoting Handlebar RiserBrand:   ROXMFG Part Number:   4R-P3RX-01Description:   Rox unique patented riser design allows you to pivot the riser in the original clamps and pivot the bar orientation in the top clamps of the riser. This provides an incredible amount of bar positions for...

Product Name:   PIVOTING HANDLEBAR RISER BLACK 4" RISEProduct Type:   Street Pivoting Handlebar RiserBrand:   ROXMFG Part Number:   4R-P4RX-01Description:   Rox unique patented riser design allows you to pivot the riser in the original clamps and pivot the bar orientation in the top clamps of the riser. This provides an incredible amount of bar positions for...

Product Name:   PIVOTING HANDLEBAR RISER CHROME 2" RISEProduct Type:   Street Pivoting Handlebar RiserBrand:   ROXMFG Part Number:   4R-P2CC02Description:   Rox unique patented riser design allows you to pivot the riser in the original clamps and pivot the bar orientation in the top clamps of the riser. This provides an incredible amount of bar positions for...

Product Name:   PIVOTING HANDLEBAR RISER CHROME 4" RISEProduct Type:   Street Pivoting Handlebar RiserBrand:   ROXMFG Part Number:   4R-P4RX-02Description:   Rox unique patented riser design allows you to pivot the riser in the original clamps and pivot the bar orientation in the top clamps of the riser. This provides an incredible amount of bar positions for...

Product Name:   STREET RISERProduct Type:   BMW Barback RiserBrand:   ROXMFG Part Number:   3R-B15R-15AFeatures:     Fits 2013 and up BMW R1200GS/GSA models 1 ½" of total pullback (moves the bar 1¼" up and ¾" back from the OEM position) Clear anodized finish Includes mounting hardware Works with stock cables, see the Rox cable re-routing instructions...

Product Name:   STREET RISER BLACKProduct Type:   1 1/2" Barback RiserBrand:   ROXMFG Part Number:   3R-B17R-15KFeatures:     These Universal Barback Risers are designed to work on any bike with a stock 1 1/8" handlebar, parallel OEM bar clamps, and open mounting area Moves bar 1 ½" up and 1" back OR forward from the OEM...

Product Name:   STREET RISER GUN METALProduct Type:   1 1/2" Barback RiserBrand:   ROXMFG Part Number:   3R-B17R-15GFeatures:     These Universal Barback Risers are designed to work on any bike with a stock 1 1/8" handlebar, parallel OEM bar clamps, and open mounting area Moves bar 1 ½" up and 1" back OR forward from the...

Product Name:   STREET RISER NATURALProduct Type:   1 1/2" Barback RiserBrand:   ROXMFG Part Number:   3R-B17R-15MFeatures:     These Universal Barback Risers are designed to work on any bike with a stock 1 1/8" handlebar, parallel OEM bar clamps, and open mounting area Moves bar 1 ½" up and 1" back OR forward from the OEM...